ATTENTION! PAINTS 7 KG AND 25 KG ARE AVAILABLE FOR SALE!
PRODUCT RANGE
Why the Praktik line?
Reliable quality
Affordable products from a federal manufacturer.
Basic formulas used, without additional enhancements.
Cost
Praktik is a line of products in which all production costs are minimised: packaging costs, advertising costs, etc. In short, the manufacturer saved on everything except the quality of the product itself.
PRAKTIK CEILING PAINT
Application
Specially developed composition for painting ceilings and upper wall panels in dry premises.

The paint can be applied on concrete, plaster, plasterboard, brick, and wooden surfaces.

7; 13 kg
PROPERTIES
SUPER WHITE MATT
QUICK-DRYING
EASY TO APPLY
FOR DRY PREMISES
LEAVES NO SPATTER AND DRIPS
EXPANDS SPACE
FOR MECHANICAL AND MANUAL APPLICATION
HIGH-QUALITY AND UNIFORM COLOUR
SNOW-WHITE SILK FABRIC EFFECT
PRAKTIK INTERIOR PAINT
Application
For painting walls and ceilings in premises with normal humidity.

The paint can be applied on concrete, brick, wood fibreboard and chipboard, plaster, previously painted surfaces (but not glossy), and paintable wallpaper.

7; 13; 25 kg
PROPERTIES
SNOW-WHITE MATT
QUICK-DRYING
EASY TO APPLY
ENVIRONMENTALLY FRIENDLY
SUITABLE FOR DRY CLEANING
VAPOUR-PERMEABLE COATING
ДЛЯ РУЧНОГО И МАШИННОГО НАНЕСЕНИЯ
КАЧЕСТВЕННОЕ И РАВНОМЕРНОЕ ОКРАШИВАНИЕ
PRAKTIK WASHABLE PAINT
Application
For premises with normal and high humidity (kitchens, bathrooms, hallways). For walls and ceilings that require washability.

The paint can be applied on concrete, plaster, plasterboard, brick, and wooden surfaces. Recommended for ingrain and fibreglass wallpaper.

DIN EN 13300/ISO11998 wet scrub resistance class 3

7; 13; 25 kg

PROPERTIES
WHITE MATT
QUICK-DRYING
EASY TO APPLY
SUITABLE FOR WET CLEANING
LOW CONSUMPTION
FOR MECHANICAL AND MANUAL APPLICATION
PRAKTIK TEXTURED PAINT
Application
Praktik textured paint is designed for decorative finishing and giving texture to surfaces of buildings and other structures, and also for interior finishing in high-humidity premises (kitchens, bathrooms, hallways).

The paint can be applied on concrete, brick, plaster, gypsum, and plasterboard surfaces, and surfaces previously painted with water-borne paints.

14 kg
PROPERTIES
WHITE MATT
QUICK-DRYING
EASY TO APPLY
COVERS MINOR SURFACE IRREGULARITIES
SUITABLE FOR LIGHT WET CLEANING
DOES NOT REQUIRE SPECIAL PREPARATION
FOR MECHANICAL AND MANUAL APPLICATION
FOR CREATING VARIOUS DECORATIVE EFFECTS
STRONG BOND WITH THE PAINTED SURFACE
EXAMPLES OF TEXTURE
This is not the be-all and end-all when it comes to the texture.
It all depends on the materials at hand, skill and imagination.
TOOLS
Texture depends not only on the special composition but also on the chosen application tool.
  • Broad hard brush
    The material can be applied on the wall using vertical, crosswise, horizontal, wave-like and other movements.
  • Comb
    Used for a more pronounced relief with a sparse pattern. Used in the same way as the brush.
  • Spatula
    A thin layer of the paint is applied on the surface using sharp, sudden strokes. The result should be a stone imitation. Without any skill, this technique is difficult to master.
  • Shaped roller
    This tool has a textured surface with a protruding pattern, which is imprinted on the fresh paint. To avoid interruption of the texture, it is preferable to paint the entire height (from the floor to the ceiling) of the wall area.
  • Trowel
    The paint is applied in two layers. The first layer is applied with a spatula and the second with a trowel. After one day, when the finish dries, the surface is coated with white enamel (matt) using a fur roller.
  • Roller with a foam or fur sponge
    Used to obtain a uniform textured surface by rolling up and down the wall. The texture will depend on the structure of the sponge or the type of its roller sleeve.
  • "DIY"
    Using fingers (in rubber gloves), wrapping the roller with cloth or rope (bamboo stalk effect), blows with a wet cloth, etc. The advantage of this technique is that it does not require any tools. With your hands and fingers, you can create any pattern. It all depends on your imagination.
  • Natural sponge, textile or creased paper
    Working with these tools requires "facing" technology. In other words, the freshly painted surface is stamped with the material.
PRAKTIK FACADE PAINT
Application
Designed for painting residential and office building facades.

The paint can be applied on brick, concrete, asbestos-cement, plastered and previously painted surfaces that are exposed to weather elements, and used inside premises to obtain coatings that are washable and resistant to wet cleaning. Not recommended for painting basements.

7; 13; 25 kg
Properties
WHITE MATT
QUICK-DRYING
EXCELLENT ADHESION

EASY AND UNIFORM APPLICATION
FOR MECHANICAL AND MANUAL APPLICATION
WEATHER-RESISTANT, VAPOUR-PERMEABLE
PRAKTIK CONCRETE CONTACT PRIMER
Application
For interior and exterior works.

The primer is designed for hard smooth surfaces: concrete and aerated concrete surfaces, gypsum, gypsum-limestone, limestone-cement and other types of plaster, cement putty, plasterboard.

Can be used on high-adhesion oil or pentaphthalic paint, and old ceramic tiles. Suitable for use before plastering and application of ceramic tiles. For manual application.

14 kg
PROPERTIES
FOR INTERIOR AND EXTERIOR WORKS
IMPROVES ADHESION OF SUBSEQUENT FINISHING MATERIALS
FOR PRETREATMENT OF SMOOTH LOW-ABSORPTION SURFACES
ENHANCED ALL-WEATHER FORMULA
PRAKTIK DEEP PENETRATION PRIMER
Application
For interior and exterior works¹.

The primer is designed for high- and medium-absorption concrete, aerated concrete, brick, wooden, cement, cement-sand, gypsum, and plasterboard surfaces.

Suitable for preparing wall and floor surfaces before facing, plastering, pouring self-levelling floors, screeds and other surfaces, and before painting and wallpapering.

10 l

¹ Except application before installation of ETICS and self-levelling floors.
PROPERTIES
FOR INTERIOR AND EXTERIOR WORKS
IMPROVES ADHESION OF SUBSEQUENT FINISHING MATERIALS
STRENGTHENS THE UNDERLYING SURFACE
REDUCES CONSUMPTION OF APPLIED MATERIALS
ENHANCED ALL-WEATHER FORMULA
PRAKTIK PVC CONSTRUCTION ADHESIVE
Application
Used for gluing paper products, light wallpaper.

Can be used as a modifier for enhancing properties of dry mixes, plaster, and putty compositions, and improves their adhesive properties.

Also used for surface priming (can be diluted with water at a ratio of 1:2).

10 kg

PROPERTIES
READY-TO-USE
EASY TO APPLY
IMPROVES ADHESION TO THE SURFACE
GIVES CONSTRUCTION MIXES CONSISTENCY WHICH MAKES APPLICATION EASIER
CAN BE TRANSPORTED AT SUB-ZERO TEMPERATURES
Any questions? You can call us!